Davey MaxiFlow SPA POOL PUMP Instrukcja Użytkownika Pobierz pdf (Strona 6)

Starting the Pump

Tooperateefcientlyandpreventpumpdamagetheremustbeafreeowofwater

to and from the pump. Before starting ensure that:

- allpipeworkiscorrectlysealed.

- thepool/spawaterlevelisatthecorrectheight.

- thatallappropriatevalvesareopenandthereisnothingpreventingtheowof

water through the system.

1. First prime the pump by ensuring that the pump is below the water level of the

spa pool.

2. Connect to the power supply or spa controller as applicable and switch on.

3. Allowthepumptorun,sothatanyairtrappedmaybeexpelled.

4. Ifprimeisnotestablishedwithinlessthanaminute,asevidencedbyastrong

owofwater,switchoffthepumpandrepeattheprocedure.

Pump Operation

The water level of the spa or spa pool should always be maintained to at least the

spajets,thusensuringwaterisinthepumpatalltimes.

Never run pump dry. Running the pump with no water may damage the

mechanical seals, causing leakage and ooding. Dry running damage and

associated damage is not covered under warranty.

Failure to undertake regular maintenance may cause damage not covered

by warranty.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Davey MaxiFlow SPA POOL PUMP Instrukcja Użytkownika Strona 6